erbank is correctly inserted, this
is confirmed via a signal tone.
REMOTE CONTROL UNIT
1.
Carefully remove the cover of the
battery compartment.
2.
Insert the batteries. In this regard,
strictly ensure that the polarity is
correct. For orientation, there are
appropriate markings in the bat-
tery compartment.
3.
Only use type AAA batteries,
1.5 V.
4.
Close the cover.
5.
If you adjust the appliance with
the remote control unit, ensure
that you always hold it in the
direction of the fan while you are
making the settings.
28
12. Tip: You can
also
check the
charge status of
the
Powerbank
when it is inser-
ted in the appli-
ance. On the rear
of the appliance,
there are small
apertures through
which
you
can
see the charging
LEDs of the Pow-
erbank.
13. And if you should need a small,
additional light source, this can
also be provided by the provided
Powerbank: Press the operating
button and keep it depressed
until the bright LED between
the two USD connections is illu-
minated. To switch this light off,
press the button again and keep it
depressed until the LED goes out.
6.
The designations on the remote
control unit are identical to the
designations of the buttons on the
appliance.
7.
To avoid damage, never allow the
remote control unit to fall from a
significant height.
8.
The remote control unit has a
range of 7 meters.
9.
The remote control unit is mag-
netic for easy storage and can
simply be affixed on the cover of
the rechargeable battery compart-
ment on the rear of the appliance.