Beurer BC 85 Instrucciones De Uso página 25

• If a connection to the app cannot be established after
30 seconds, the Bluetooth
pressure monitor switches off automatically after 3 minutes.
If you forget to turn off the device, it will switch off automati-
cally after approx. 3 minutes. In this case too, the value is
stored in the selected or most recently used user memory.
Wait at least 5 minutes before taking another
measurement.
Evaluating results
Cardiac arrhythmia:
This device can identify potential disruptions of
the heart rhythm when measuring and if necessary, indicates
this after the measurement with the symbol
This can be an indicator for arrhythmia. Arrhythmia is an illness
in which the heart rhythm is abnormal because of flaws in the
bioelectrical system that regulates the heartbeat. The symp-
toms (skipped or premature heart beats, pulse being slow or
too fast) can be caused by factors such as heart disease, age,
physical make-up, excess stimulants, stress or lack of sleep.
Arrhythmia can only be determined through an examination by
your doctor.
If the symbol is shown on the display after the measure-
ment has been taken, repeat the measurement. Please ensure
that you rest for 5 minutes beforehand and do not speak or
move during the measurement. If the symbol
quently, please consult your doctor. Self-diagnosis and treat-
ment based on the measurements can be dangerous. Always
follow your GP's instructions.
®
symbol goes out and the blood
.
appears fre-
Risk indicator:
The measurements can be classified and evaluated in accord-
ance with the following table.
However, these standard values serve only as a general
guideline, as the individual blood pressure varies in different
people and different age groups etc.
It is important to consult your doctor regularly for advice. Your
doctor will tell you your individual values for normal blood
pressure as well as the value above which your blood pres-
sure is classified as dangerous.
The classification on the display and the scale on the unit
show which category the recorded blood pressure values fall
into. If the values of systole and diastole fall into two different
categories (e.g. systole in the 'High normal' category and di-
astole in the 'Normal' category), the graphical classification on
the device always shows the higher category; for the example
given this would be 'High normal'.
Blood pressure Systole
value category (in mmHg)
Setting 3:
severe hyper- ≥ 180
tension
Setting 2:
moderate hyper- 160 – 179 100 – 109
tension
Setting 1:
mild hyperten- 140 – 159 90 – 99
sion
25
Diastole
Action
(in mmHg)
seek medical
≥ 110
attention
seek medical
attention
regular monito-
ring by doctor