DE
ice expands due to the freezing process. However, we recommend filling the
ice bowl at least halfway for a homogeneous freezing process.
EN
9.
Place the lid on the ice cream bowl.
10. Plug the power cord into an electrical outlet and switch on the appliance with
FR
the POWER button. The display lights up blue briefly and displays "60:00".
NL
The symbol for the standard program Mix & Freeze blinks.
11. The appliance is ready for operation.
IT
12. You can now select the desired program with the "Menu" button. The selected
program is indicated by a corresponding symbol.
ES
13. The following programs are available:
PL
Symbol
Mix and Freeze
The pre-set time for the normal ice cream preparation is 60:00.
You can change the preparation time by pressing the buttons TIME + and
TIME -.
This is possible in 1-minute-steps between 60 minutes and 5 minutes.
Freeze
If the ice cream does not have the desired consistency, you can extend the
freezing time by maximum 60 minutes. It is possible to change the relevant
time selection from 60 to 5 minutes by pressing the buttons TIME + and
TIME -. The basic setting is 30 minutes.
Mix
When the ingredients need to be mixed evenly before starting the programme,
please choose this programme selection before the ice cream preparation.
The ingredients are mixed 60 minutes at maximum. It is possible to change
the relevant time selection from 60 to 5 minutes by pressing the buttons
TIME + and TIME -. The basic setting is 10 minutes.
14. Important: once you have selected a program, you cannot change it while the
program is running. You then have to use the POWER switch to switch the
30 von 112
Copyright UNOLD AG | www.unold.de
Program
Display
Mix and
Ice Cream
Freeze
Freeze
Cooling only
Mix
Mixing only
Stand 29.7.2020