Safety Information - brennenstuhl ML CA 130 IP54 Manual De Instrucciones

Ocultar thumbs Ver también para ML CA 130 IP54:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
Mobile Battery-Operated LED Chip Light
D
ML CA 130 IP54

SAFEty INFOrMAtION:

• Please read the operating instructions carefully prior to use and do not throw them away.
• Prior to every use, check the lamp and power adapter for damage. Never use the lamp or
power adapter if there is any damage. In this case, please contact an electrician or write to the
service address provided by the manufacturer.
Non-compliance may result in risk to life due to electrical shock!
• Never open the device. The lamp does not contain any components that require maintenance.
The LEDs cannot be replaced.
• Do not use the work lamp in explosive environments in which lammable liquids, gases or
dusts are present. Risk to life!
• Keep children away from the lamp. Children cannot estimate the risk of electric shock.
• Only use the included power adapter or car charger to charge the batteries. Using other power
adapters or car charger cables may damage the batteries or result in an explosion!
• Disconnect the power supply from the electricity prior to cleaning and switch the lamp of.
Clean the lamp regularly with a dry, lint-free cloth. To remove dirt, a damp cloth can be used.
Do not use any solvents, caustic cleaning agents, etc.
• To prevent blinding, do not look directly into the light.
SwItCHING tHE LAMP ON AND OFF:
D
E
Press the (B) button to turn on the lamp. By pressing the (A) button, the brightness can be set to
100% or 50%. When selecting 50%, the service life of the lamp extends in comparison to the 100%
setting as it consumes less energy. Press the (B) button again to turn the lamp of.
BA_ML_CA_130_IP54_150317.indd 5
C
ON
B
OFF
50%
A
100%
5
17.03.15 14:47

Publicidad

Tabla de contenido
loading

Tabla de contenido