Application Programs; Net-Total Formulation/Second Tare Memory - Acculab ALC Serie Manual De Instrucciones

Application Programs

Net-Total Formulation/Second Tare Memory

With this application program you can weigh in components for formulation of a mixture.
Preparation
Configure the Net-Total Formulation/Second Tare Memory application in the operating menu: See "Configuring the Balance/Scale"
Menu code 2.1.3
Example
Step
1. Turn on the balance/scale
2. Place an empty container on
the balance/scale
3. Tare the balance/scale
4. Add the first component
5. Store the first component weight
If the print format is set
to include data ID codes,
the following is printed:
6. Add the next component
7. Store the 2nd component weight
8. Add further components,
if desired
9. Display total weight
10
Key (or instruction)
[ON/OFF]
[ZERO]
[F]
[F]
As described
for steps 5 and 6
[CAL] <2 sec
and fill to desired final weight
Display/Printout
+ 65.0 g
+ 120,5 g
0.0 g
NET
N1 + 120.5 g
+ 70,5 g
0.0 g
NET
+ 191,0 g