Display Icons; Remote Control - Dyson pure hot+coollink Manual De Instrucciones

Setting up Dyson Link app
Additional features can be enabled when connected to the Dyson Link app on your smart device.
This requires an app enabled device and a Wi-Fi connection.
Download the Dyson Link app, available on
iOS and Android.
Internal and external air quality data is displayed via the Dyson Link app. Please refer to the on-screen instructions. You can make a personal
choice for indoor air quality sensitivity during initial Dyson Link app set up. You can also select a location for external air quality data.

Display icons

Flashing green = Wi-Fi is ready to connect to your
Dyson Link app
Flashing white = Wi-Fi connecting
Solid white = Wi-Fi connected
Off = Wi-Fi disabled
Solid white =
purifying/ air quality target
has not been met
Solid green = air quality target has been met
Off = appliance is not in auto cleaning mode
Solid red = appliance is heating
Solid white = appliance has reached target
temperature
Solid white = appliance is in night mode
Off = appliance is not in night mode
Select 'Add a Product' from within the
app and follow the on screen instructions.

Remote control

Standby ON/OFF
Airflow speed control
Auto mode
Focused mode
Sleep timer
The Dyson Link app can also be used to control your appliance.
Please note the appliance and the Dyson Link app requires a Wi-Fi
signal to function.
Remote control docks magnetically.
Attach the remote control to the top of the
appliance with the buttons facing down.
Product SSID
XXXXX-XXX-XX-XXXXXXXX-XXXX
Product Wi-Fi Password
XXXXXXXX
Mac address
X X:X X:X X:X X:X X:X X
In order to connect the appliance,
you will need the information on
the front of this manual.
Cooling mode
Thermostat control
Oscillation ON/OFF
Diffused mode
Night mode
To operate, point the
remote control toward
the front of the base.
51