Cleaning The Inside Of The Appliance - UNITED OFFICE ULG 350 B1 Instrucciones De Uso

Cleaning the inside of the appliance:

With every lamination, contaminants are deposited on the rollers inside the
laminator . Over time, this reduces the performance of the laminator .
You should therefore clean the rollers inside the laminator after use .
Prepare the appliance for use, as described in the chapter Preparing for
♦
hot lamination, until the green indicator light Ready
♦ Then guide a sheet of folded in the middle A4 paper (maximum thickness 1 . 0 mm),
without a pouch and with the fold forward, slowly into the manual pouch
insertion slot
♦ Release the sheet as soon as you notice that it is being pulled in automatically .
The contaminants on the rollers inside the laminator now firmly attach themselves
to the sheet of paper . The paper will be ejected from the pouch ejector slot
of the laminator .
♦ Repeat this cleaning process several times . Use a fresh clean sheet of paper
each time .
When you no longer see any contaminants on the paper, the rollers inside the
laminator are clean .
Storage
♦ Store the appliance in a clean, dry place away from direct sunlight .
Disposal
The adjacent symbol of a crossed-out dustbin means that this device is subject to
Directive 2012/19/EU . This directive states that this device may not be disposed
of in the normal household waste at the end of its useful life, but must be handed
over to specially set-up collection locations, recycling depots or disposal companies .
This disposal is free of charge for the user .
Protect the environment and dispose of this device properly .
Your local community or municipal authorities can provide information on how to
dispose of the worn-out product .
ULG 350 B1
.
1
glows .
3
7
GB │ MT │ 53 ■