Metal Cutting - Genesis GRS550 Manual Del Operario

results and may overheat the saw.

Metal Cutting

Blades specifically designated for cutting metals must be used for this purpose. you may
use a light oil as a coolant when cutting metal; this will prevent overheating of the blade,
help the blade cut faster, and promote longer blade life.
WaRning:
Wear safety glasses. Wear a dust mask if operation is dusty. Wear
hearing protection during long periods of operation. Support and
clamp work piece securely. Keep your balance and don't overreach.
1. Adjustable, Pivoting Shoe
2. Rubberized non-slip Boot
3. Rubberized non- slip Rear handle
4. Tool-less Blade Collet
5. Trigger Switch
6. Lock-On Button
7. Swivel handle Release Button
Two-Year Warranty
This product is warranted free from defects in material and workmanship for 2 years
after date of purchase. This limited warranty does not cover normal wear and tear nor
damage from neglect or accident. The original purchaser is covered by this warranty and
it is not transferable. Please return the tool to store location of purchase along with your
receipt, and you will receive a new drill or a refund. THIS PRODUCT IS NOT WARRANTED
IF USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
Toll-Free Help Line:
for questions about this or any other GeNeSIS Product please call Toll-free: 888-552-8665.
RECIpROCAtInG SAW
Operator's Manual
2
4
1
7
GRS550
6
5
3