Technical Description - Drive Harmony 14200 Manual De Instrucciones

10. Technical Description

SPECIFICATIONS:
Power Supply (Note: See rating
label on the product)
Fuse Rating
Dimension (L x W x H)
Weight
Classification
Temperature
Environment
Humidity
Operating
Altitude
Model
Dimension (L x W x H)
Weight
Maximum Weight Capacity
NOTE: 1. Consult Drive Medical for further technical documents.
2. The specification is also suitable for other areas operating with same
3. Mattress dimension and weight is measured without foam cushion
4. The manufacturer reserves the right to modify the specification
AC 110-120V 60Hz, 4.5A (for 120V system)
T5AL 250V(for 120V system)
31.2 x 26 x 16 (cm) or 12.3" x 10.2" x 6.3"
5 kg or 11.02 lb
Class I, Type BF,
IP21 (for 230V System ), IP20 (for 120V System)
Applied Part: Air Mattress
Not suitable for use in the presence of a flammable
anesthetic mixture (No AP or APG protection)
Environmental Information
Operation: 10° C to 33° C (50° F to 91° F)
Storage: -15° C to 50° C (5° F to 122° F)
Shipping: -15° C to 70° C (5° F to 158° F)
Operation: 10% to 90% non-condensing
Storage: 10% to 90% non-condensing
Shipping:10 % to 90% non-condensing
2000 m (Maximum)
8" Mattress with 2" foam insert in base
200 x 90 x 20.3 cm or 78.7" x 35.4" x 8"
7.5 kg or 16.5 lbs
400 lbs
power supply.
without notice.
Pump
Mattress
17