Master PH-1000 Manual De Instrucciones página 4

Repair & Maintenance
Repair
All repairs and maintenance recommended in this instruction manual must be performed by a
qualified repair technician who is experienced with the repair of electric tools, a qualified service
organization, or Master Appliance Corp.'s Repair Department. Please contact Master's Customer
Service Department for genuine Master Appliance replacement parts or for repair service.
Repair Service Dept
877-250-1934
sales@masterappliance.com
www.masterappliance.com
WARNING: Always unplug your tool before performing any maintenance or repairs. Use
only identical Master Appliance brand replacement parts.
Maintenance
Heating Elements: Heating element abuse and eventual burnout can occur from one of the
following conditions: 1) Improper line voltage 2) Improper attachment 3) Nozzle too close to work
being heated (less than 1 inch).
Cleaning: Unplug heat gun before cleaning. To clean outside of tool, use only a mild soap and
damp cloth. Do not use other cleaning agents, turpentine, gasoline, lacquer or paint thinner,
or other solvents that may contain chemicals which are harmful to plastics and other insulating
materials. Never immerse tool in a liquid or allow a liquid to enter inside the tool. Make sure all
vents and openings are free and clear of debris. Note: Always unplug your tool before cleaning.
6
www.masterappliance.com
1000 / 2000 Quick-Touch
OFF
ON
www.masterappliance.com
Heat Gun
™
PH-1000/2000
Operating Instructions
1) Plug heat gun into properly
rated outlet.
2) Press and hold Momentary
Contact rocker switch for HOT
position.
3) Switch returns to OFF
position as soon as it is
released.
7