Display Of The Parent Unit (Fig. 1); Preparing For Use - Philips AVENT SCD720/86 Manual De Usuario

Introduction

Display of the parent unit (Fig. 1)

Preparing for use

Baby unit
Parent unit
Go to www.philips.com/welcome to register your product and to read the
detailed user manual.
1 Signal strength indicator
2 Eco Max indicator
3 Night dim mode symbol
4 Cry alert indicator
5 Mute symbol
6 Battery status indicator
7 Navigation arrow
8 Temperature symbol
9 Microphone sensitivity indicator
10 Nightlight symbol
11 Lullaby symbol
12 Timer or timer repeat symbol
IMPORTANT: Read the safety instructions carefully before you use the
baby monitor and keep them for future reference.
We advise you to use the baby unit connected to the mains. To guarantee
automatic power backup in case of mains failure, you can insert four 1.5V AA
alkaline batteries (not included).
Do not use rechargeable batteries. The baby unit does not have a charging
function and rechargeable batteries discharge slowly when they are not in
use.
The parent unit runs on two rechargeable batteries that are supplied with
the baby monitor. Charge the parent unit before you use it for the first time
and when the batteries are low.
Please note that for the SCD720/SCD721/SCD723, you have to charge the
parent unit for the full 10 hours to have a cordless operating time of 18
hours. (For the SCD725: the charging time is 14 hours and the operating
time is 25 hours.
Note: When you start using the baby monitor, it takes 4 charge and
discharge cycles before the rechargeable batteries reach their full capacity.
English
7