Bluetooth ® Settings - Beurer BC 57 Instrucciones De Uso

If the battery change symbol
appears, no further measurements are possible and you
must replace all batteries.
flashes on the display. Now set the date and time as
described below.
The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Set the hour format, date, time and
Bluetooth ® settings
This menu allows you to set the following functions, one
after another.
Hour
Date
➔
format
It is essential to set the date and time. Otherwise, you will
not be able to save your measured values correctly with a
date and time and access them again later.
If you press and hold the memory button M, you can
set the values more quickly.
is flashing and Lo
Time ➔ Bluetooth
➔
Press and hold the START/STOP
onds if you have not reinserted the batteries.
The hour format now flashes on the
display.
• Select the desired hour format us-
ing the memory button M and con-
firm with the START/STOP button
.
The year flashes on the display.
• Select the desired year using the
memory button M and confirm with
the START/STOP button
The month flashes on the display.
• Select the desired month using the
memory button M and confirm with
the START/STOP button
The day flashes on the display.
• Select the desired day using the
memory button M and confirm with
®
the START/STOP button
If the hour format is set as
display sequence is reversed.
26
button for 5 sec-
.
.
.
, the day/month