Cleaning And Storing The Device And Cuff; Technical Specifications - Beurer BC 57 Instrucciones De Uso

8. Cleaning and storing the device and
cuff
• Clean the device and cuff carefully using a slightly
damp cloth only.
• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and cuff under
water, as this can cause liquid to enter and damage the
device and cuff.
• If you store the device and cuff, do not place heavy
objects on the device and cuff. Remove the batteries.

9. Technical specifications

Model no. BC 57
Measurement Oscillometric, non-invasive blood
method pressure measurement on the wrist
Measurement range Cuff pressure 0-300 mmHg,
Systolic 60-260 mmHg,
Diastolic 40-199 mmHg,
Pulse 40-180 beats/minute
Display accuracy Systolic ± 3 mmHg,
Diastolic ± 3 mmHg,
Pulse ± 5 % of the value shown
Measurement inac- Max. permissible standard deviation
curacy according to clinical testing:
Systolic 8 mmHg /
Diastolic 8 mmHg
Memory
Dimensions
Weight
Cuff size
Permissible operating
conditions
Permissible storage
conditions
Power supply
Battery life
Accessories
Data transfer
34
2 x 60 memory spaces
L 78 mm x W 60 mm x H 23 mm
Approximately 96 g (without bat-
teries)
140 to 195 mm
+10 °C to +40 °C, ≤85 % relative
humidity (non-condensing)
-20 °C to +50 °C, ≤85 % relative
humidity, 800-1050 hPa ambient
pressure
2 x 1.5V AAA batteries
For approx. 200 measurements, de-
pending on levels of blood pressure
and pump pressure
Instructions for use, 2 x 1.5V AAA
batteries, storage box
2402 MHz – 2480 MHz frequency
band
Transmission power max. 2.8 dBM
The blood pressure monitor uses
Bluetooth ® low energy technology
Compatible with Bluetooth
smartphones/tablets
List of supported smartphones/
tablets
® 4.0