Sears Kenmore 11091942710 Instrucciones De Instalación página 31

Help Mode Submenu
Display
Step Indication
1 1h.XX
2 2h.XX
3 3h.XX
4 1.X##
5 2.X##
6 3.X##
7 4.X##
8 SC.XX
9 SU.XX
10 EU.XX
* To erase the 3 help codes, press COLORS/DELICATES button.
** The Errors displayed in this section are the history errors that
have occurred in the dryer (not necessarily an error that is in
progress). The current error is displayed in the MANUAL KEY
FUNCTION IN DIAGNOSTIC SUB-MODE.
In help mode, other display symbols and elements are mapped
toreflectthestateofvariousinputsandoutputsasfollows:
All Dryers
*. . . . . . . . . . . . . . . . . low voltage present (below about 90 VAC)
°(circle above digit) . . . . . . . . . . . . . . . . . . . . . . . . . . door closed
OR . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . motor sensed running
AIR . . . . . . . . . . . . . . . . . . . . . . . . . . . . heater/gas valve relay on
FLUFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . motor relay on
ELECTRONIC CONTROL SET-UP INSTRUCTIONS
Explanation
Help Code 1, where XX is the help
code number.*
Help Code 2, where XX is the help
code number.*
Help Code 3, where XX is the help
code number.*
Error history code 1, where X is
the F or d code, and ## is the code
number.**
Error history code 2, where X is
the F or d code, and ## is the code
number.**
Error history code 3, where X is
the F or d code, and ## is the code
number.**
Error history code 4, where X is
the F or d code, and ## is the code
number.**
CCU software revision, where XX is
the software revision number.
UI software revision, where XX is the
software number.
UI EEPROM revision, where XX is
the EEPROM number.
31