Before Using The Appliance The First Time; Operation - Unold 18010 Instrucciones De Uso

BEFORE USING THE APPLIANCE THE FIRST TIME

1. Remove all packaging materials and any transport safety devices. Keep
packaging materials away from children – danger of suffocation!
2. Clean all parts with a damp cloth, as described in the chapter "Cleaning
and care".
3. Check to make sure that the appliance is stable.
4. Connect the base via the power cord to the power supply (220–240 V~,
50/60 Hz).
5. Remove the kettle from the base and open the lid.
6. Add clear, cold water to the "Max" marking.
7. Close the lid by pressing lightly.
8. Place the kettle on the base.
9. Switch on the kettle by pressing the ON/OFF button. The control lamp at the
bottom of the handle will turn on.
10. When the water boils, the appliance automatically shuts off and the indicator
lamp goes out.
11. For hygienic reasons, please discard the water from the first boiling.

OPERATION

1. Remove the kettle from the base and open the lid.
2. Fill the kettle with at least 0.5 liters of water ("Min" marking). Do not fill
the kettle with more than 1.5 liters of water ("Max" marking).
3. Close the lid by pressing lightly until it locks into place. The locking mecha-
nism prevents the lid from opening accidentally when pouring water.
4. Place the kettle upright on the base.
5. Switch on the kettle by pressing the ON/OFF button. The control lamp at the
bottom of the handle will turn on.
6. When the water boils, the appliance automatically shuts off.
7. To make the water stop boiling earlier, press the switch upward.
8. Caution: The automatic shut-off function works only if the lid is properly
closed.
Stand 18.2.2020
Copyright UNOLD AG | www.unold.de
DE
EN
FR
NL
IT
ES
PL
19 von 56