Tripp-Lite PDUMH15 Manual Del Propietário página 3

Installation
2
Attach the input plug of the PDU to a grounded
outlet. Insert the plug directly into a grounded outlet
that does not share a circuit with a heavy electrical load
(such as an air conditioner or refrigerator).
Note: Select models include an input plug adapter that
converts plug types for various applications. See below
for details.
2-1
NEMA Adapter Connection (Optional -
PDUMH20HV Only): The PDUMH20HV includes a
plug adapter that adds a NEMA L6-20P plug to the
input power cord. Use this adapter only if you will be
connecting the PDUMH20HV to a NEMA L6-20R
outlet. Insert the IEC 60320 C19 connector
adapter into the IEC 60320 C20 connector
input power cord. Secure the connection with the
retention bracket
fasten the two halves of the bracket around the
connection as shown.
Caution: To avoid the risk of electric shock, ensure that
the Neutral (L2) conductor has been identified before
connecting the PDU.
2-2
Input Power Cord Connection (PDUMH20HV
Only): Insert the IEC 60320 C19 connector
input power cord into the IEC 60320 C20 inlet
PDU. Connect the other end of the input power cord
to a compatible source of AC power, such as a UPS
system, PDU or utility outlet. The PDU should be
provided with over-current protection. PDUMH20HV
should be provided with a maximum 20A branch-rated
over-current protection device.
Note: The AC power source should not share a circuit
with a heavy electrical load (such as an air conditioner
or refrigerator).
201103062 93-3059.indd 3
(continued)
by using the included bolts to
C
A of the
B of the
2
A of the
B of the
C
2-1
2-1C
2-2
PDUMH20HV
3
C
A
B
B
88 A
C
4/29/2011 2:33:41 PM