HCX 1080 BT
RADIO OPERATION
1. Press SOURCE button on remote control to select TUNER MODE.
/
/
2. Tune to the desired radio station by using
CH+ ,
CH-,
/ FF,
/ FF+ for a manual
tuning.
3. For AUTO TUNING , press
button on the unit or SEARCH button on remote control to
enter in automatic searching radio station mode.
For a best FM reception
• Make sure that you have fully extended the FM antenna wire.
Preset Radio Stations:
You can store up to 40 of your favorite stations in the tuner memory for easy recall at any time.
1) Press SOURCE button on remote to select TUNER, and press GOTO button, the VFD will display
"_ _ _: _ _" digital input mode, please input FM frequency of the radio station that what you want to
listen.
For example : 106.20, after input station frequency by using the number buttons, press PL AY
button to confirm.
2) Once the desired radio station is tuned, press MEMORY button on remote control, VFD will
display " CH_ _" ; input the preset number you want to store the radio station.
How to recall presets radio stations
Press GOTO button on remote control, VFD will display " CH_ _ " , and press the preset number of
the radio station to recall it. For example, press 1 to play the radio station you preset in position 1.
I f the preset number is above 10, press '+10 ' button on remote control and number key to input
second digit preset number.
AUXILIAIRY IN PUT OPERATION
The unit can be used to play the music from many types of external device
1. Connect by using a 3.5mm Male-to-Male Stereo cable the external device to the LINE IN
connector/ jack of the unit.
> I f your TV has only one output for audio (MONO). Connect it to the left (white) audio jack on the
unit.
2. Press
SOURCE repeatedly to select the LINE IN MODE.
3. Start playback on the external audio device. Adjust the volume on the audio device (do not set
the volume to a high level in order to avoid distortion). You may also adjust the volume on the
appliance.
To control playback function, use the controls on the external audio device.
17