Connecting An Electric Dryer - GE 04 Instrucciones De Instalación

CONNECTING AN ELECTRIC DRYER

(Skip for gas dryers and if your dryer already has a power cord attached)
TOOLS YOU WILL NEED
Slip-joint pliers
Flat-blade
screwdriver
MATERIALS YOU WILL NEED
4" dia. metal elbow
3/4" Strain relief
(UL recognized)
4" Duct clamps (2) or
4" spring clamps (2)
Safety glasses
4" dia. metal duct
(recommended)
4" dia., UL-listed
flexible metal duct (if
needed)
Installation Instructions
Phillips
screwdriver
Level
Gloves
Exhaust hood
Duct tape
Dryer power cord kit
(not provided with
dryer)
UL rated 120/240V,
30A with 3 or 4 prongs.
Identify the plug type
as per the house
receptacle before
purchasing line cord.
Cover plate (Kit
4"
WE49X22606)
Before making the electrical connection, turn off
the circuit breaker(s) or remove the dryer's circuit
fuse(s) at the electrical box. Be sure the dryer cord
is unplugged from the wall.
ACCESS COVER OFF THE TERMINAL BLOCK.
9
NEVER LEAVE THE