Electric Dryer - GE GFDR485 Serie Manual Del Propietário

CONNECTING AN ELECTRIC DRYER
(Skip for gas dryers and if your dryer already has a power cord attached)
TOOLS YOU WILL NEED
Slip-joint pliers
Flat-blade crewdriver
MATERIALS YOU WILL NEED
4" dia. metal elbow
3/4" strain relief
(UL recognized)
4" duct
clamps (2) or
4" spring clamps (2)
Safety glasses
4" dia. metal duct
(recommended)
4" dia., UL-listed
flexible metal duct (if
needed)
Installation Instructions
Phillips screwdriver
Level
Gloves
Exhaust hood
Duct tape
Dryer power cord kit
(not provided with
dryer)
UL rated 120/240V,
30A with 3 or 4 prongs.
Identify the plug type
as per the house
receptacle before
purchasing line cord.
Before making the electrical connection, turn off
the circuit breaker(s) or remove the dryer's circuit
fuse(s) at the electrical box. Be sure the dryer cord
is unplugged from the wall.
ACCESS COVER OFF THE TERMINAL BLOCK.
20
NEVER LEAVE THE