Operating Limits - OHAUS VE Serie Manual De Instrucciones

VE Series U-Pallet Scale
OPERATION
For setup, calibration, and proper operation, refer to the instruction manual supplied with the indicator. Refer to the specifications
section for capacity, and readability information.

Operating Limits

Model Maximum Central load
VE1500P 2250 kg
VE1500PW 2250 kg
The VE Series U-Pallet Scale is designed for an evenly distributed load of 1500 kg
Loading/Unloading the Pallet Scale
•
Place the load on the scale with a hand pallet truck, crane or forklift. Ensure that the load is not swinging when it
is placed on the U-Pallet scale.
•
Remove the load by raising it at least 10 cm above the U-Pallet scale before moving or repositioning.
TABLE 2. MAXIMUM ADMISSIBLE LOADING.
1
Maximum Side load
NOT RECOMMENDED
NOT RECOMMENDED
For continued best operating performance:
•
Avoid falling loads, shocks and hard lateral impacts
•
When weighing, all items should be centrally located on the U-Pallet scale frame
and not over hanging the sides.
•
The forks of a pallet truck, crane or forklift must not be touching the scale during
weighing.
•
Never move the scale when weighing
•
Verify the calibration of the U-Pallet scale system at regular intervals.
2
One Side Corner Load
NOT RECOMMENDED
NOT RECOMMENDED
3
EN-3