Operating Limits - OHAUS DEFENDER 3000 Serie Manual De Instrucciones

EN-4
OPERATION
For setup, calibration and proper operation, refer to the instruction manual supplied with the indicator. Refer to the
specifications section of the Drum Scale for capacity and readability information.

Operating Limits

Although the Drum Scales have extremely rugged construction, certain load limits must not be exceeded.
Depending on the type of loading, the maximum safe static load, i.e. the maximum permissible loading, is shown in
Table 2.
Maximum Central Load
Model
DFD32M500ES
DFD32M1000ES
DFD32M2500ES
DFD32M1000ER
DFD32M2500ER
For continued best operating performance:
 Avoid falling loads, shocks and hard lateral impacts
 When weighing, all items should be centrally located on the Drum Scale and not
over hanging the sides or the ramps.
 Verify the calibration of the Drum Scale system at regular intervals.
TABLE 2. MAX ADMISSIBLE LOADING
1
(80% Surface Area)
825lb / 375 kg
1650lb / 750 kg
4125lb / 1870 kg
1650lb / 750 kg
4125lb / 1870kg
Maximum side Load
2
(30% Surface Area)
660lb / 300 kg
990lb / 300 kg
1650lb / 750 kg
990lb / 300 kg
1650lb / 750 kg
DEFENDER 3000 Series Drum Scale
One Side corner load
3
(10% Surface Area)
440lb / 200 kg
660lb / 300 kg
1100lb / 500 kg
660lb / 300 kg
1100lb / 500 kg