Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 58

Vacuum cleaning

For further tips, see  Quick Start Guide  Operation.
Select one of the following attachments from the scope of delivery for different applications:
Attachment
Floor nozzle with powered brush
roller
Crevice nozzle/furniture brush
Rubber nozzle
Without
TIP: Always adhere to the cleaning and maintenance instructions of the floor covering, carpet or furni-
ture manufacturer. Only use undamaged nozzles. Damaged nozzles can scratch surfaces.
Vacuuming in Eco mode
Vacuuming is carried out with reduced power in Eco mode. The appliance consumes less energy and the oper-
ating time of the rechargeable battery is extended. The brush roller also rotates if the floor nozzle is attached.
1.
Attach an additional attachment to the appliance if necessary.
2.
Push the On/Off switch to the "I" position to switch on the appliance.
The appliance vacuums in Eco mode.
The LED on the handle lights up orange.
The LEDs on the top of the appliance illuminate the work area.
3.
Vacuum the surface.
4.
Push the On/Off switch to the "0" position to switch off the appliance.
5.
Empty and clean the dust container ("Cleaning the dust container and filter" on page 27).
TIP: The LED on the handle starts flashing orange when the battery charge is running low.
The appliance switches off automatically when the battery charge is too low. Charge the rechargeable
battery ("3 Installing and charging the appliance" on page 24).
i
nsTallinG anD charGinG ThE appliancE
Cleaning of hard floors, short-pile carpets or upholstery
Cleaning of hard-to-reach places.
Cleaning of furniture with the attachable furniture brush.
Absorption of liquids
The appliance can also be used without an additional nozzle or
brush. It is not possible to absorb liquids without an additional
nozzle.
Application
25

Publicidad

Tabla de contenido
loading

Tabla de contenido