Step 3: Setting Up The Shorts Step 4: Get Into The Correct Position For You - Atlantic Therapeutics Innovo Instrucciones De Uso

STEP 3: PUTTING ON THE SHORTS
Follow the steps in the Quick Start Guide.
1. Unpack all contents from box. Turn the shorts inside out. Before
applying the spray, we recommend that you hang the shorts up.
2. Remove the lid from the bottle of spray. Holding the bottle approx.
15-20 cms from the shorts, spray each electrode 2 - 3 times to ensure
an even coverage. Spray each of the 8 integrated electrodes. Turn the
shorts the right way around, so that the electrodes are on the inside,
before putting them on.
Important: Put on the shorts as soon as you have sprayed the electrodes.
3. Pull on the shorts until the waistband is sitting comfortably above your
hips. The red and blue connectors should be to the front, with the wash
label to the rear, as per Fig 11.
4. Ensure the whole surface of each electrode is in full contact with your
skin.
5. When the shorts are correctly positioned, the electrodes will be in place
as shown in Fig 12.
12
Fig. 7
Fig. 9
Fig. 8
Fig. 10
15-20cm
Fig. 9
Fig. 11
Fig. 10
Fig. 12