Caring For Your Innovo - Atlantic Therapeutics Innovo Instrucciones De Uso

TECHNICAL SPECIFICATIONS
TREATMENT PROGRAM INFORMATION
Table 1: Treatment Parameters – Stress urinary incontinence
Frequency
Prog
Hz
1
General Specifications
Product Type: 208
Classification: Internally powered equipment, Class II charger, and Type BF applied parts.
This controller is not suitable for use in an oxygen-rich environment.
Neuromuscular Electrical Stimulation (NMES)
NMES may be defined as the application of electrical stimulation of the peripheral nervous system to contract
a muscle either through the direct activation of the motor neurons in the mixed peripheral nerve, or indirectly
through reflex recruitment.
Waveform: Symmetrical bi-phasic square current waveform.
PCB Fuses:
• F1: 1 Amp, fast-acting, max. Voltage Rating (V): 50, Interrupting Rating (AC/DC): 50A@50VDC/50A@VAC.
• F2: 1 Amp, fast-acting, max. Voltage Rating (V): 50, Interrupting Rating (AC/DC): 50A@50VDC/50A@VAC.
Electrical Specifications
The output current reading displayed on the screen indicates the peak current for a 500Ω resistive load only. The
actual current value delivered may be lower due to varying impedance levels within users. See table on next page
for measured values at different resistive values.
Program 1 (P1)
Rated Outputs – Voltage/Currents for Stress urinary incontinence
Parameters
Output RMSA
Output RMSV
Output Frequency
DC Component
Pulse Width t1
Max Output Current (peak)
I
t
1
t
INNOVO produces a symmetric bi-phasic constant current waveform. The frequency = 1/T, the phase durations
®
t and t are the same, the overall pulse duration is the sum of t
1 2
Pulse
Width μS
50 620
500Ω
30.3mA
15.1V
50HZ
0V
620μS
120mA
T
3
t
2
Contraction Relaxation
(Sec.) (Sec.)
5
1KΩ 1.5KΩ
24.4mA 16.6mA
24.4V 25.0V
50HZ 50HZ
0V 0V
620μS 620μS
100mA 70mA
+t +t . i = current intensity.
1 2 3
Treatment
Time (Min.)
5 30
23