Basic Safety Instructions - Schluter Liprotec LT EBR 1 Manual De Uso

EN
Safety

2.3 Basic safety instructions

2.3.1 Preventing severe and deadly injuries
Electrical shocks are possible when connecting the

power pack.
– Make sure that the power pack is connected to the
mains connection by qualified electricians only.
– Make sure that all other work is performed only by
qualified, expert personnel.
– Before connecting the components, make sure the
power pack is not energised.
– Connect the receiver only to the power pack and not
directly to the mains connection.
There is a possibility of electrical shocks when installing

moist components.
– Only store the components in the closed original
packaging.
– Protect the components from moisture.
– Do not install moist components.
– Adhere to the relevant regulations for electronic
devices at the place of use.
– Adhere to the protection classes of the components.
– Adhere to the scopes of protection in accordance
with DIN VDE 0100-701. Observe country-specific
deviations and the locally applicable regulations.
There is a possibility of electric shocks when installing

components with damaged insulation.
42 Bluetooth receiver directions for use