Decommissioning, Disassembly; Decommissioning - Schluter Liprotec LT EBR 1 Manual De Uso

EN

Decommissioning,

disassembly

12 Decommissioning, disassembly

Electrical shock is possible in case of improper
disassembly.
Disassembly by unauthorised personnel can lead to a
deadly electrical shock.
Have the component decommissioned and

disassembled by qualified, expert personnel only.
12.1 Decommissioning
To decommission the LIPROTEC system, proceed as
follows:
Switch off the LIPROTEC system.

Switch off the mains connection of the power pack and

secure it against reactivation.
Disconnect the power pack from the mains connection.

For this purpose, loosen the screws (see
using the power pack
housing covers (see
fig. D item 2).
Disconnect the mains cable from the power pack and

strip the exposed wires.
You can now disassemble the individual

components of the LIPROTEC system.
68
DANGER
, fig. D item 3) and remove the
directions for using the power pack
Bluetooth receiver directions for use
directions for
,