Clean Remote Control; Elimination Of Faults - Schluter Liprotec LT EBR 1 Manual De Uso

9.3 Clean remote control

Malfunction due to moisture.
The remote control is not protected against moisture; this
may cause malfunctions or defects.
Keep the remote control away from liquids and

moisture.
Wipe contamination off the remote control with a dry,

non-linting, soft cloth.

10 Elimination of faults

If faults or malfunctions of the LIPROTEC
system occur, always check the status displays
of the Bluetooth receiver (see chapter "Status
displays").
Fault
Circuit breaker
is triggered
No lighting
Bluetooth receiver directions for use
CAUTION!
Cause of
fault
Power pack
incorrectly
connected
Power pack
defective
Connections
mixed up
Elimination of faults
Troubleshooting
Connect power pack
correctly (only by qualified
electrician).
Replace power pack (only
by qualified electrician).
Check all cable connections
for a proper connection
EN
63