Disassemble Receiver; Disposal - Schluter Liprotec LT EBR 1 Manual De Uso

12.2 Disassemble receiver

To disassemble the Bluetooth receiver, proceed as follows:
Loosen the connection cable of the Bluetooth receiver

from the connection terminals of the power pack. To do
this, read the "Directions for using the power pack". If
you use an additional connection cable between the
Bluetooth receiver and the power pack, disconnect the
terminal connectors connecting the Bluetooth receiver to
this cable instead.
Loosen the terminal connectors connecting the outputs

of the receiver with the connection cables of the LED
strips.
You can now remove the Bluetooth receiver.


13 Disposal

This product must not be disposed of in domestic
waste within the EU. The recyclable materials
contained in old components must be recycled. The
environment and/or human health must not be
damaged by unmonitored waste disposal. Please
dispose of old components through suitable
collection systems or send the component to the
place where you purchased it for disposal. The
component is then sent to material recycling.
Bluetooth receiver directions for use
EN
Disposal
69