Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
F INSTRUCTIONS FOR USE
•
Wash and condition your hair as normal.
•
Squeeze out excess moisture with a towel and comb through.
•
Select your attachment before you turn on the appliance.
, To Secure Attachments to the Handle
•
Align the arrow symbols (d) on the attachment locking ring with the centre
of the channels around the edge of the power handle locking ring and push
together.
•
Turn the attachment locking ring firmly clockwise in the direction of the lock
arrow (+ L) to secure the power handle and the attachment together
•
Dry length and roots partially prior to styling.
, Tip: for best results aim for 80% dry hair.
•
Section the hair prior to styling. Style the lower layers first.
•
Plug the product into the mains power supply
•
Start styling on lower temperature first. Select the appropriate temperature
for your hair type using the temperature setting switch on the base of th
styler.
•
To increase the temperature turn the temperature setting switch to position
'1' for low heat, '2' for high heat and position 'C' for the cool setting.
, NOTE: The Brush attachments will only start rotating when a temperature
setting has been selected.
, Volume and Shape using the 40mm and 50mm brushes
•
The 50mm mixed bristle brush adds volume and fullness and is ideal for mid
to longer hair.
•
The 40mm soft bristle brush adds root volume, creates polished ends and
loose curls. Ideal for shorter, fine hair.
•
To use the rotating function, press the right arrow (+) on the 2-way rotation
switch for the brush to rotate clockwise.
•
Wrap the bottom of the hair around the brush
•
Press the left arrow on the 2-way rotation switch (-) to wind hair around the
brush, stopping at the roots.
•
Press the opposite arrow on the 2-way rotation switch to unwind.
•
Let the attachments cool before removing.
4
Publicidad
Tabla de contenido
