Fracarro SIG7720 Instrucciones De Uso página 39

c. From the PROGRAM LIST menu, select Decrypt for the decrypted programs by controlling the cou-
pled receiver.
To decrypt the programs, insert the flag on the "decrypt column" in correspondence with the desired
program.
d. Repeat the operation for each program to be sent to the network, making sure to associate a differ-
ent multicast group for each program;
IMPORTANT: for the correct functioning of the module, the 20Mbit/s maximum
through output for each SIG7720 module should not be exceeded (refer to the
MEASURE -> TOTAL Kbps menù on the TPE or WEB MANAGEMENT -> PROGRAM
LIST ->TOTAL Kbps on the WEB interface menù).
9. Repeat all the programming operations for all the SIG7720 modules that will make up the headend.
After programming, all streamers can be connected to the main network (refer to the following CON-
NECTION OF THE SIG7720 MODULE TO THE LOCAL NETWORK paragraph).
NOTE: Presets empty menu is available for easy and quick SIG7720 custom settings storage.
39