Descargar Imprimir esta página

Safety Instructions - Ferm FCT-160F Manual De Instrucciones

Publicidad

80

2. SAFETY INSTRUCTIONS

The following pictograms are used in these instructions for use:
Read instructions carefully
In accordance with essential applicable safety standards of European directives
Class II machine – Double insulation – You don't need any earthed plug.
Denotes risk of personal injury, loss of life or damage to the tool in case of non-
observance of the instructions in this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the mains electricity in the case that the cord
gets damaged and during maintenance
The number of revolution of the machine can be electronically set.
Wear a dust mask.
Wear eye protection.
Faulty and/or discarded electrical or electronic apparatus have to be collected at
the appropriate recycling locations.
Special safety instructions
Always keep the cord away from the moving parts of the machine.
In the case of locking, switch the machine off immediately and remove the plug from the
mains.
Compare the maximum number of revolutions allowed of the accessories with the
number of revolutions of the machine.
When you put the machine away the engine must be switched off and moving parts must
have reached a standstill.
Never attach an assembly spanner to your machine with a piece of string or anything
similar.
Never use the axle locking button if the machine is operating.
Ferm
Ferm
GB
05

Publicidad

Capítulos

loading

Este manual también es adecuado para:

Ctm1010