Machine Data; Technical Specifications; Safety Instructions - Ferm CTM1010 Manual Del Usuario

COMBITOOL 160W
CTM1010
Thank you for buying this Ferm product.
By doing so you now have an excellent product,
delivered by one of Europe's leading suppliers. All
products delivered to you by Ferm are manufactured
according to the highest standards of performance
and safety. As part of our philosophy we also
provide an excellent customer service, backed by
our comprehensive warranty. We hope you will enjoy
using this product for many years to come.
The numbers in the following text refer to the
pictures on page 2-3
Read the operating instructions carefully
before using this device. Familiarise
yourself with its functions and basic
operation. Service the device as per the
instructions to ensure that it always
functions properly. The operating
instructions and the accompanying
documentation must be kept in the
vicinity of the device.
Contents

1. Machine data

2. Safety instructions

3. Assembly of accessoires
4. Mounting the flexible shaft and stand
5. Maintenance
1. MACHINE DATA

Technical specifications

Voltage
Frequency
Power consumption
No load speed
Capacity of spring chuck
Weight
Lpa (Sound pressure level)
Lwa (Sound power level)
Vibration
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
4
with another and as a preliminary assessment of
exposure to vibration when using the tool for the
applications mentioned.
- using the tool for different applications, or with
different or poorly maintainted accessories,
may significantly increase the exposure level.
- the times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work
patterns.
Package contents
1 Combitool
1 Flexible shaft
1 Stand
1 Spring chuck spanner
40 Accessories
1 Case
1 Instructions for use
1 Safety section
1 Guarantee card
Check first whether or not the delivery has been
damaged by transport and/or whether all the
parts are present.
2. SAFETY INSTRUCTIONS
Explanation of symbols
230 V
50 Hz
160 W
15.000–35.000/min
3.2 + 2.4 mm
0.6 kg
70+3 dB(A)
83+3 dB(A)
1.7+1.5 m/s
2
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates the presence of an electrical
voltage.
Variable speed control.
Wear ear and eye protection.
Wear a dust mask.