Publicidad
Idiomas disponibles
Idiomas disponibles
For this purpose, tilt the segment by
pressing on the clip.
In order to close the hood, position the
segment slightly inclined towards the
sanding disc. Both hooks of the segment
have to be placed behind the edge of the
straight part of the hook. Engage the clip
by means of a slight pressure.
Attention!
For all other works you always have to work with the
complete protection hood!
!
Attention!
Do not touch rotating parts!
Dust protection
Dust from material such as paint containing lead, some wood species,
minerals and metal may be harmful. Contact with or inhalation of the dust
may cause allergic reactions and/or respiratory diseases to the operator or
bystanders. Certain kinds of dust are classified as carcinogenic such as
oak and beech dust especially in conjunction with additives for wood
conditioning (chromate, wood preservative). Material containing asbestos
must only be treated by specialists.
Where the use of a dust extraction device is possible it shall be
•
used.
To achieve a high level of dust collection, use industrial vacuum
•
cleaner (Dust category M) for wood and/or minerals together with
this tool.
The work place must be well ventilated.
•
The use of a dust mask of filter class P2 is recommended.
•
Care and Maintenance
Before the beginning of the maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel.
After every repair the machine has to be inspected by an
electric specialist. Due to its design, the machine needs a minimum of care
and maintenance. However, the following points have to be observed:
Always keep the power tool and the ventilation slots clean.
17
Publicidad
