AEG AGS58800S0 Manual De Instrucciones página 16

16
Installation
2. Install the appliance in the niche.
Push the appliance in the direction of
the arrow (1) until the upper gap cover
stops against the kitchen furniture.
Push the appliance in the direction of
the arrow (2) against the cupboard on
the opposite side of the hinge.
3. Adjust the appliance in the niche.
The lower hinge cover (in the accessories
bag) makes sure that the distance be-
tween the appliance and the kitchen
furniture is correct.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
Open the door. Put lower hinge cover in
position.
4. Attach the appliance to the niche with 4
screws.
4mm
44mm
2
1
I
I