Before Initial Use - Dometic FRESHLIGHT FL1600 Instrucciones De Uso

Dometic FreshLight
8

Before initial use

Inspection before starting up
Before you switch on the roof air conditioner, observe the following:
➤ Check whether the supply voltage and frequency correspond to the values
specified in the technical data, see page 37.
➤ Ensure both the air intake opening and the air nozzles are free. All ventilation
grilles must always be kept free to ensure that the roof air conditioner is able to
operate at maximum capacity.
!
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the intake
grille.
Check remote control and insert batteries
➤ Insert the provided batteries in the remote control battery compartment, see
"Replacing the remote control batteries" on page 30.
➤ Check that the four Dip switches (fig. 4, page 4) are in the correct position.
➤ If you changed the position of the Dip switches: Acknowledge the new setting
using the Reset button (fig. 3 10
Setting the time
➤ Set the current time: see "Setting the time" on page 31.
EN
page 4).
,
Before initial use
21