Before Initial Use - Dometic FRESHLIGHT FL1600 Instrucciones De Uso

FreshLight
8

Before initial use

Inspection before starting up
Before you switch on the roof air conditioner, observe the following:
➤ Check whether the supply voltage and frequency correspond to the values
specified in the technical data, see page 37.
➤ Ensure both the air intake opening and the air nozzles are free. All ventilation
grilles must always be kept free to ensure that the roof air conditioner is able to
operate at maximum capacity.
!
CAUTION! Beware of injury
Do not insert your fingers or objects into the air nozzles or the intake
grille.
Setting the time
➤ Set the current time: see chapter "Setting the time" on page 31.
Set the remote control
➤ Insert the batteries (see chapter "Replacing the remote control batteries" on
page 30).
✓ The display shows all symbols for 5 seconds.
➤ Press simultaneously the
✓ The display shows the default model number.
➤ Press simultaneously + and – button within 3 seconds to select the model
number:
– FreshWell 3000: 02
– FreshJet: 07
– FreshLight: 11
✓ The display shows all symbols for 5 seconds.
✓ The remote control is ready for operation.
EN
button and the button during this 5 seconds.
Before initial use
21