Description Of Symbols - Triton TW SS10 Instrucciones De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 54
Introduction
Thank you for purchasing this Triton tool. This manual contains information necessary for safe
and effective operation of this product. This product has unique features and,
even if you are familiar with similar products, it is necessary to read this manual carefully
to ensure you fully understand the instructions. Ensure all users of the tool read and fully
understand this manual.

Description of Symbols

The rating plate on your tool may show symbols. These represent important information about
the product or instructions on its use.
Wear hearing protection
Wear eye protection
Wear breathing protection
Wear head protection
Wear hand protection
Read instruction manual
Conforms to relevant legislation and safety standards.
Caution!
Class I construction (protective earth)
Indoors use only!
Environmental Protection
Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authority or retailer
for recycling advice.
WARNING: This product is heavy and as a precaution it is advised that two
people assemble the machine.
GB
4
Original Instructions
Specification
Model No:
Rating:
Drive:
No load speed:
Sharpening stone:
Honing wheel:
Bore size:
Power cord length:
Protection class:
Dimensions (L x H x W):
Weight:
Note: Imperial conversions are approximate.
Sound level information:
Sound Pressure L
Sound Power L
Uncertainty K:
WARNING: Always wear ear protection where the sound level exceeds 85dB(A) and limit the
time of exposure if necessary. If sound levels are uncomfortable, even with ear protection,
stop using the tool immediately and check the ear protection is correctly fitted and provides
the correct level of sound attenuation for the level of sound produced by your tool.
WARNING: User exposure to tool vibration can result in loss of sense of touch, numbness,
tingling and reduced ability to grip. Long term exposure can lead to a chronic condition. If
necessary, limit the length of time exposed to vibration and use anti-vibration gloves. Do not
operate the tool with hands below a normal comfortable temperature, as vibration will have a
greater effect. Use the figures provided in the specification relating to vibration to calculate
the duration and frequency of operating the tool.
Sound and vibration levels in the specification are determined according to international
standards. The figures represent normal use for the tool in normal working conditions. A poorly
maintained, incorrectly assembled, or misused tool, may produce increased levels of noise
and vibration. www.osha.europa.eu provides information on sound and vibration levels in the
workplace that may be useful to domestic users who use tools for long periods of time.
TWSS10
220V - 240V~, 50/60Hz, 120W
Induction motor
125min
Ø250 x 50mm
Ø230 x 30mm
Ø12mm
2m
345 x 370 x 270mm
14.9kg
:
86.2dB(A)
PA
:
99.2dB(A)
WA
3dB
-1

Publicidad

Tabla de contenido
loading

Tabla de contenido