Functions - Unold 18585 Instrucciones De Uso

10. Place the kettle so it is straight on
the base, to ensure that contact is
established with the base.
11. Press the "
on the appliance.
12. When the water is boiling the auto-
matic boil dry circuit switches off
the appliance.

FUNCTIONS

The glass electronic kettle has two functions:
Heating or boiling water
The water is warmed to the pre-set temperature. Thus you obtain lukewarm to
briskly boiling water, as desired. The temperature can be set in 10°C increments
between 60°C and 100°C.
The factory preset is 100°C.
Keeping warm
The previously boiled water is kept warm at the desired temperature after boiling/
heating. The temperature at which the water is kept warm can be set in 10°C
increments between 60°C and 100°C. The maximum temperature at which the
water can be kept warm is the boiling temperature.
There is no factory preset for the temperature at which the water is kept warm.
The keep warm function is ended automatically when the kettle is removed from
the base.
Through this function you can ensure that your water also still has the desired
temperature, even if you do not use it immediately after concluding the boiling
process.
" button to switch
Copyright UNOLD AG | www.unold.de
13. For hygienic reasons, please dis-
card the water from the first boil-
ing.
19