Use - Heating Or Boiling Water - Unold 18585 Instrucciones De Uso

USE - HEATING OR BOILING WATER

1. Connect the base to the power
supply (220–240 V~, 50/60 Hz)
via the power cord.
2. All indicator lights briefly light up
and indicate that the appliance is
ready for operation.
3. Remove the kettle from the base.
4. Press the "Unold" opening button
in the centre of the lid. The lid
is unlocked and opens automati-
cally.
5. Fill the kettle with the desired
quantity of clean, cold water. At
least 0.25 litres of water must be
filled, the maximum fill quantity
is 1.2 litres of water.
6. Caution: If the kettle is overfilled,
boiling water can splash out and
cause burn injuries!
7. Close the lid by pressing lightly.
8. Place the kettle so it is straight on
the base, to ensure that contact is
established with the base.
9. Check to make sure that the appli-
ance is stable.
10. Caution: If the kettle is not cor-
rectly seated the appliance can-
not be switched on.
11. Press the "
perature display 100°C will light
up to indicate that the boiling
process has started. The indicator
light in the interior of the appli-
ance will be illuminated.
20
" button The tem-
Copyright UNOLD AG | www.unold.de
12. During the boiling process it is
possible to select a different tem-
perature.
13. If you desire a different tempera-
ture select it via the arrow keys.
You can select 60°C, 70°C, 80°C,
90°C and 100°C.
14. When the water has reached the
desired temperature, the auto-
matic control shuts off the appli-
ance.
15. Naturally you can also press the
" " button again if you want
to end the process earlier. In this
process the currently set tempera-
ture will saved for the next boiling
process until the base is discon-
nected from the mains supply.
16. Please ensure that you always
switch off the appliance via the
" " button, before you take it
off of the base.
17. Caution: The automatic tempera-
ture control only functions when
the lid is properly closed.
18. If you want to heat up water again,
let the appliance cool for several
minutes.
Boiling water can cause scald-
ing. Therefore, please handle
the appliance with care when
it contains hot water.