Publicidad
Idiomas disponibles
Idiomas disponibles
Adjusting the metal bracelet
The metal bracelet of your IWC watch can be readily adjusted to the size of
your wrist. You can make this adjustment yourself by removing or adding
individual bracelet links.
Taking the bracelet apart and removing individual links
Determining bracelet length
Place the watch with its separated bracelet on your wrist and estimate the
number of links you need to remove (as described above). If you need to
shorten the bracelet by several links, you should remove the same number
of links from each half of the bracelet, if possible, to ensure that the clasp
can be worn more or less at the centre of the wrist. Keep the surplus links
and the separating tools safely for use in subsequent adjustments.
Open the push-button release safety clasp by pressing
the button on the side. Lay the bracelet with its top sur-
face on a firm base. Using the special tools provided,
you can now push down the securing pin (1) at the des-
ired point of separation and, at the same time, displace
the unmarked pivot pin laterally by about 3 mm (2) with
the second special tool.
Now pull the protruding pivot pin from the bracelet (3).
The metal bracelet is now separated, and you can ad-
just the length of the bracelet by removing or adding in-
dividual links.
22 | 23
Publicidad
