Recoil Starter Handle - Troy-Bilt Squall 210 Manual Del Operador

Recoil Starter Handle

The recoil starter handle is used to manually start the engine.
Chute Rotation Control (If so equipped)
The chute rotation control is located on the back of the snow
thrower. To rotate the chute to the left, squeeze the lever against
the chute rotation control and rotate left. To rotate the chute to
the right, squeeze the lever against the chute rotation control
and rotate right.
Drift Cutters (If so Equipped)
The drift cutters are designed for use in deep snow. Their use
is optional for normal snow conditions. Maneuver the snow
thrower so that the cutters penetrate a high standing snow drift
to assist snow falling into the augers for throwing.
S 4 — c & F 11
ection ontrolS eatureS