3.
Slowly pull the recoil starter handle up towards the eye
bolt.
4.
Slip the recoil starter rope into the eye bolt from the back
of the snow thrower. See Figure 3-7.
5.
Securely tighten the eye bolt and handle knob.
Set-Up
Adding Oil
Refer to the Engine Operator's Manual packed with your snow
thrower for information on adding and checking oil.
Adding Fuel
Refer to the Engine Operator's Manual packed with your snow
thrower for information on adding fuel.
S
3 — A
& S
-U
ection
SSembly
et
9
p