SRAM RockShox Reverb Stealth Manual De Instrucciones página 11

English
INSTALL THE REMOTE (MATCHMAKER X)
Remote - Install the remote bracket nut in the channel on
the inside surface of the remote clamp. Position the remote
bracket on the outside of the MatchMaker X (MMX) clamp and
install the MMX bracket bolt. Use a T25 TORX ® to torque the
bracket bolt to 3-4 N·m (35-44 in-lb).
Brake lever - Position the brake lever against the handlebar.
Close the remote clamp around the handlebar and brake lever.
Insert the remote clamp bolt and loosely tighten the bolt to hold
the assembly together. Rotate the remote clamp to the desired
position and use a T25 TORX to tighten the clamp bolt to
5-6 N·m (43-52 in-lb).
Shifter - Attach the shifter to the remote bracket with the
shifter mounting bolt. Use a T25 TORX wrench to torque the
shifter mounting bolt to 2.8-3.4 N∙m (25-30 in-lb). Reposition
the shifter if necessary by loosening the MMX bracket bolt,
adjusting the angle of the shifter, and re-tightening the bracket
bolt to 3-4 N·m (35-44 in-lb).
11
Reverb Stealth User Manual
95-4215-004-000 Rev D
25
3-4 N·m
(35-44 in-lb)
25
5-6 N·m
(43-52 in-lb)
2.8 - 3.4 N·m
25
(25-30 in-lb)