SRAM RockShox Reverb Stealth Manual De Instrucciones página 12

English
BLEED THE REMOTE
14 14
Before operating the Reverb Stealth, you must bleed the remote.
Please visit www.sram.com/en/service for Reverb remote bleed instructions.
RAISE AND LOWER THE SADDLE
15 15
Before riding your bike, sit on your bike while it is stationary and cycle the seatpost
through its travel a couple of times. To lower the seatpost completely, press and hold the
actuator; your body weight will compress the seatpost. To raise the seatpost, unweight
the saddle then press and release the actuator.
You can adjust the height of the seatpost to any point in its travel by releasing the
actuator while the seatpost is at the desired height.
It is possible to manually raise the seatpost without actuating the remote by pulling up on the
saddle with enough force.
ADJUST THE SPEED OF THE SEATPOST
16 16
Turn the speed adjuster on the remote counter-clockwise to
decrease the speed of the saddle height change or clockwise
to increase the speed of the saddle height change.
12
Reverb Stealth User Manual
95-4215-004-000 Rev D