SRAM RockShox Reverb Stealth Manual De Instrucciones página 4

English
PREPARE THE FRAME
1 1
Use isopropyl alcohol and a clean, lint free rag to clean any debris or grease from the
inside of the seat tube. Remove any burrs from frame's seat tube edges then smooth
with 400 grit sandpaper.
APPLY FRICTION PASTE
2 2
Apply a moderate amount of friction paste to the inside of the seat tube and contact
surface of the seatpost. Do not apply grease.
WARNING - Seatpost Slippage
Friction paste is designed to create friction between the contact surfaces to
prevent the seatpost from slipping without over-torquing the seat clamp device.
Failure to use friction paste could allow your seatpost to slip during use which
could lead to serious injury and/or death.
PREPARE THE SEATPOST
3 3
Remove the saddle clamp bolt(s) and apply grease to the bolt threads. Loosely re-install
the saddle clamp bolts. Turn the speed adjuster in the direction opposite the arrow, until
it stops.
4
Reverb Stealth User Manual
95-4215-004-000 Rev D