SRAM RockShox Reverb Stealth Manual De Instrucciones página 5

English
DISCONNECT THE HOSE
4 4
Important: For Reverb Stealth models equipped with the Connectamajig hose quick
release, please consult the
at sram.com/service.
If installed, use a T25 TORX
Use a T25 TORX to remove the clamp bolt from the remote assembly, then remove the
remote assembly from the handlebar.
Hold the hose near the hose barb by hand, then turn the remote assembly
counter-clockwise to unthread the hose barb from the hose.
5
Reverb Stealth User Manual
User Manual - Connectamajig Reverb
®
to remove the shifter from the remote assembly.
addendum document
95-4215-004-000 Rev D