General Care Instructions; Regular Maintenance - RIESE & MUELLER Charger Manual De Instrucciones

GENERAL CARE INSTRUCTIONS

DANGER!
Remove the battery before doing
any work on your E-Bike, such as
maintenance or care. The unin-
tentional activation of the elec-
tric system can cause injuries.

REGULAR MAINTENANCE

When you pick up your E-Bike, your specialist
dealer will already have assembled it in a
condition ready to ride. Nevertheless, you
need to care for your bike on a regular basis
and have your specialist dealer carry out the
necessary maintenance work at the speci-
fied intervals to guarantee the lasting and
safe function of all parts.
WASHING AND CARING FOR YOUR BIKE
Sweat, dirt and salt from winter road main-
tenance or sea air can damage your bike.
You should therefore regularly clean your
E-Bike and protect it against corrosion. Use
clear water for cleaning and a little bit of
washing-up liquid if necessary to dissolve
grease residues. After drying your bike, treat
surfaces with a care product available from
your specialist dealer. Finally, wipe all parts
with a clean, soft cloth.
EN-38
ATTENTION!
Only take on tasks for which you
have the necessary special
knowledge and tools.
ATTENTION!
Do not clean your E-Bike with a
strong water jet or steam jet from
a short distance. The water can get
passed the seals and get inside the
bearings. Lubricants are diluted,
increasing friction. In the long run,
the bearing surfaces will deteriorate.