SAFETY INFORMATION
DANGER!
This manual includes assembly and maintenance work which may need to be
done before a required inspection is due, which needs to be carried out by a
specialist dealer (see page 40). Never perform work on your E-Bike beyond this.
It requires specialist knowledge, tools and skills which is why it can only be car-
ried out by a specialist dealer. Never ride your E-Bike if assembly work has been
carried out incompletely or improperly. This would compromise your own safety
and that of other cyclists and motorists.
DANGER!
When getting onto your bike with the assistance mode turned on, remember that
the E-Bike will start moving as soon as you put your foot on the pedal. Apply the
brakes first as the unfamiliar push can cause a hazard or accident.
DANGER!
Switch off the E-Bike system and take out the battery before carrying out any
work on your E-Bike, e.g. assembly or maintenance work, or before transporting
it. Unintentional activation of the E-Bike system poses a risk of injury.
EN-5