Capture Mode - Reflecta 64220 Manual De Usuario

1.1 Adjust brightness and color of image
You can adjust brightness and color of image in capture mode.
When enter into capture mode, press ENTER button, following picture will
show on:
EV means brightness；R means red; G means green; B means blue.
Press ENTER button to switch, press LEFT/RIGHT button to adjust data
Press SCAN button back to image preview mode
1.2 Capture: Mirror/Flip(Hard Key)
If any image requires for Mirror or Flip before capture, press LEFT/RIGHT
button for Mirror/Flip function, the live view will be adjusted accordingly(This
step is to correct user misplaced the film/photo either upside down or flip).
Mirror and Flip function can only be used while in the live view mode.
Mirror
Press LEFT button to change image left to right
Flip
Press RIGHT button to upside down image

1.3 Capture mode

12