Scanning Film; Placing Film/Slide Into The Holder - Reflecta Combo Album-Scanner Manual Del Usuario

adjust the brightness (exposure) of your subject.
Press the EV/delete button to adjust exposure value.
Press the up or down button to adjust the exposure
compensation between +2EV to -2EV in 0.5 increments.
The amount of compensation is shown at the bottom of
the LCD screen. Press the EV/delete button again to
complete the setting.
3.

Scanning Film

Placing film/slide into the holder

1. Keep the glossy side of your film upwards.
Open the negative/positive slide holder as Illustrated.